Take a look at what the new skyTROTTER mobile booth offers to help improve your work.
Repairing minor damage on large vehicles or machinery has never been easier than with the new and improved skyTROTTER mobile industrial booth.
Ideal for rail-based vehicles: trams, metros, light rail, long-distance trains, cable cars and all types of vehicles running on railway tracks.
· Reaches 3.8 metres in height at maximum elevation and can move up to 40 metres from the power socket, thanks to a retractable power cable of that length.
· Battery-powered movement with rubber wheels and full working steering.
· Integrated 4-stage filtration system with activated carbon.
· Fully operated from inside the booth via an intuitive, easy-to-use control panel.
Enter the booth through the side access door.
Move the skyTROTTER to the desired location. skyTROTTER is fitted with a 48v battery to carry out the movement without needing to connect the equipment to a power socket.
Once positioned in the work area, connect skyTROTTER to the power socket. Use the control panel to raise the booth to the desired position.
Use the control panel to bring the booth horizontally closer to the work area, creating a semi-enclosed working environment.
Switch on the ventilation and start working on the area to be repaired. The 4-stage filtration system will purify the air, keeping the environment free of VOCs.
Once the work is done, move the booth to the next area and start working on the next repair.
Fully self-contained, battery-powered vehicle, operated from inside the booth.
skyTROTTER can reach any point on the vehicle thanks to its booth's triple-axis movement and approach system.
Improve the paint process for your repairs, reducing time and costs.
The filters inside the booth clean the air, removing the VOCs generated during the painting process.
Dimensions:
Length: 3,740 mm
Width: 1,440 mm
Height: 2,620 mm
Technical description:
Airflow: 6,000 m3/h
Max. air speed: 1.26 m/s
Average air speed in work area: 0.3-0.6 m/s
VOC retention: 80÷97%
Travel speed: 2.5 km/h
Lighting power: 950 lux
Self-contained movement battery: 48v with smart charger.
Power cable: 40m retractable three-phase cable.
Electric traction: 220 Nm (torque)
Voltage: 380V/50Hz
Noise level: 75±5 dB (A)
Filtration system:
1st Stage: ANDREA cardboard filter.
2nd Stage: Paint-Stop filter.
3rd Stage: G4 synthetic filter.
4th Stage: Activated carbon filter.
Lifting system:
Dual-cylinder electro-hydraulic scissor lift platform.
Max. working height: 2,400 mm
Lifting time: 30 s
Max. load: 200 kg
Safety systems:
Safety camera (rear and side).
Proximity bumpers.
Yellow strobe light.
ATEX control panel.
ATEX lighting.
Share this catalogue with your partners and colleagues and show them the benefits of the touch-up solution of the future.
Download catalogueIs skyTROTTER suitable for repairs on trains?
Yes, skyTROTTER is ideal for touch-ups and damage repair in low and mid-level areas of trains, trams, light rail, cable cars, machinery and heavy vehicles.
Can skyTROTTER reach higher areas of a train/bus?
Yes, skyTROTTER is equipped with an electro-hydraulic platform that can reach heights of up to 3.8 m at maximum elevation.
How do I start up skyTROTTER?
skyTROTTER is a plug and play product. All you need to do is plug it into the mains power supply. Its flexible 40 m power cable allows the skyTROTTER to move comfortably along and between trains/buses/trams.
Does skyTROTTER comply with ATEX regulations?
Yes, skyTROTTER is fitted with ATEX components to comply precisely with the applicable ATEX regulations.
skyTROTTER is an advanced, innovative product, but do you have experience providing solutions directly to manufacturers, maintenance providers and other key players worldwide in the rail sector?
Yes. We design, develop, manufacture, supply and install custom paint booths for original equipment manufacturers (OEMs) worldwide, train and bus operators and maintenance providers on five continents, as well as other industrial customers. We have more than 40 years of experience as manufacturers of smart, customised solutions for major projects worldwide.
When or how often should the filters inside the booth be changed, so the operator works in optimal and safe conditions?
This depends on many factors and the individual working conditions in each case, such as the type of paint, the amount of overspray, the operator's own way of working, working times and workload, and the distance kept from the filters and from the vehicle or machine being repaired… However, skyTROTTER includes an alarm system that informs the operator when the filters need changing, as it has an hour counter and an illuminated alarm to keep the filters in optimal condition. The filters can be changed easily, and we supply all the necessary spare parts.
